Our ADT135 is Pump/Level Control Input Trip Amplifier, with dual on/off trips,that is suitable for SIL1, SIL2 and SIL3 rated safety loop applications and any process input. This unit has…
The ADT118 Thermocouple Temperature Input Quad Output Trip Amplifier is suitable for combinations of process inputs and SIL1, SIL2 & SIL3 rated safety loop applications. RFI Protection to IEC61000-4-3 available…
Our ADT111C is a Din Rail Mounted Temperature/Thermocouple Input Trip Amplifier with a ten turn dial calibrated for set point which is suitable for combinations of process inputs and SIL1,…
The ADT142 is our potentiometer dual output trip amplifier suitable for SIL 1, 2 & 3 applications. Input is and Potentiometer input. Ouput is a set of changeover contacts (D.P.C.O)…
The AGS1126X-EP is an externally powered Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axis under harsh circumstances and…
…with a drive voltage of 20V. The voltage source can be up to 10Vdc, maximum drive 20mA. Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient:…
Our ADM230 Process Current / Voltage Transmitter – is custom built, calibrated and supplied to meet your specification. The ADM230 is the tested and trusted transmitter for converting your current…
The ADM235 is a 5 Channel Signal Isolator/Converter accepting 5 Process Input / Outputs suitable for use with SIL1, SIL2 and SIL3 rated safety loop applications. It also has the…
…has a true universal ac/dc supply voltage 21V through 265V ac/dc. Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -20°C to +70°C Operating Ambient: 0°C to +55°C Relative Humidity: 5%…
…and is suitable for any Process inputs. The instrumentation is manufactured within our high impact strength, polycarbonate din rail & surface mounting enclosure. Input is any volt free contact or…