The APM489-3.5-LP is a Loop Powered Process Meter which has a nominal 3.5 Digit High-Contrast display with black 12.7 (0.5”) high digits. Measuring process input however with other inputs available…
Our ASC200 is a DC Current Input Non-Intrusive Split-Core Transducer with 1Metre length side-integrated sleeved cable which provides easy installation and is loop powered to reduce wiring. This allow for…
Our ADM231X-5 is a Multi Output Signal Isolator/Splitter which is suitable for use with SIL1, SIL2 and SIL3 rated (EN61508-2) Safety Instrumented System (SIS) loop applications. Any input current/voltage signal…
The AGS1125-2 is a Dual Channel Inclinometer with a channel indicating incline and a channel indecating roll suitable for applications requiring precise inclination or acceleration measurements along two axis under…
The ADM210X is a Thermocouple Input to RTD Output Converter. Input is Any signal developed from a thermocouple, with >4mV span. Typical input: 0-150°C type T, 0-250°C type K, 0-200°C…
Our DC Moving Iron Ammeter / Voltmeter can handle various custom of input ranges both AC and DC with display ranges customised to your needs. Our short-scale (90° sweep) &…
The ADT138X-7 Trip Amplifier with up to 7 Output Trip Set points, suitable for combinations of process inputs and SIL1, SIL2 & SIL3 rated safety loop applications. Inputs are DC…
The AST132 is our Process I/V input trip amplifier with two trip set points suitable for SIL 1, 2 & 3 applications Input is any DC voltage or current process…
The ASM220 is our mV Signal transmitter/isolator suitable for SIL 1, 2 & 3 applications Input is from PT100 RTD with 2 or 3 Wire connection as standard, any temperature…
SKU: AB Series Our original range of Trip Amplifiers, Trip Transmitters, Arithmetic Units, Signal Converters, Signal Isolators and Transmitters which are all still fully supported and available as new. ACC…