Terms and conditions …liability for any delay loss or damage caused wholly or in part by fire, Act of God, Act of Terrorism, Act of War or governmental restriction condition or control or…
ACT10 – Non-Intrusive AC Current Input Sensor Our ACT-10 is an AC Split-Core current input sensor with a Self-Locking mechanism and provides easy installation. It is suitable for non-intrusive monitoring, surface mounted current monitoring & AC current... Our ACT-10 is an AC Split-Core current input sensor with a Self-Locking mechanism and provides easy installation. It is suitable for non-intrusive monitoring, surface mounted current monitoring & AC current…
ADP416 – 3-Phase 4-Wire Unbalanced Watt/Power Transducer The ADP416 3-Phase 4-Wire Unbalanced Watt/Power Transducer is suitable for combinations of process inputs. Standard input current 0-1 or 0-5Amps, Direct or via CT’s. Standard input voltage 63V, 115V, 230V... The ADP416 3-Phase 4-Wire Unbalanced Watt/Power Transducer is suitable for combinations of process inputs. Standard input current 0-1 or 0-5Amps, Direct or via CT’s. Standard input voltage 63V, 115V, 230V…
ADR131X-3 – Three Way Output Interface Relay ...to 110V DC applied via the Relay Contact Outputs are 3 repeat C.O contacts rated 8A 250Vac as standard, however output can be specified. Environmental Condition Mounting/Dimensions Environmental Condition Storage... …to 110V DC applied via the Relay Contact Outputs are 3 repeat C.O contacts rated 8A 250Vac as standard, however output can be specified. Environmental Condition Mounting/Dimensions Environmental Condition Storage…
AGS1126X-EP – Heading Rate of Change Sensor The AGS1126X-EP is an externally powered Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axis under harsh circumstances and... The AGS1126X-EP is an externally powered Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axis under harsh circumstances and…
ADR131X-5-DC – Five Way Output Interface Relay ...DC applied Relay Contact 5 X Repeat C.O Contacts, rated 8A 250Vac as standard. Maybe be specified as ether all N.O or N.C contacts, or as a combination of both... …DC applied Relay Contact 5 X Repeat C.O Contacts, rated 8A 250Vac as standard. Maybe be specified as ether all N.O or N.C contacts, or as a combination of both…
AGS1135 – Water Usage Monitor / Controller ...from flow meter Output is 240Vac (16A max) Mains LIVE normally active and de-activated on Trip. Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient: -15°C... …from flow meter Output is 240Vac (16A max) Mains LIVE normally active and de-activated on Trip. Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient: -15°C…
ASM210 – Thermocouple Input Temperature Transmitter/Isolator ...-15°C to +55°C Relative Humidity: 5% to 95% RH (Non-Condensing) Performance Isolation: 1000V RMS Input/Output/Supply Linearity/Accuracy: <±0.1 mV Span Response time: <200mS Input Over range: <300% Mounting/Dimensions Enclosure: 22.5w x... …-15°C to +55°C Relative Humidity: 5% to 95% RH (Non-Condensing) Performance Isolation: 1000V RMS Input/Output/Supply Linearity/Accuracy: <±0.1 mV Span Response time: <200mS Input Over range: <300% Mounting/Dimensions Enclosure: 22.5w x…
AGS1126 – Heading Rate of Change Sensor The AGS1126 is a Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axus under harsh circumstances and returning to... The AGS1126 is a Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axus under harsh circumstances and returning to…
ACC315 – Process Signal Input Multiplier / Divider Unit The ACC315 is our Process Signal Input Multiplier / Divider Unit for SIL 1, 2 & 3 applications. Multiplication and divider unit can be used for multiple applications requiring a... The ACC315 is our Process Signal Input Multiplier / Divider Unit for SIL 1, 2 & 3 applications. Multiplication and divider unit can be used for multiple applications requiring a…