AEC230X

AEC210 – AC/DC Thermocouple/Temperature Input Transmitter

The AEC210 AC/DC Thermocouple Temperature Signal Transmitters are customised for use with any thermocouple type and supplied calibrated over the temperature range to suit your application. The AEC series instrumentation...

The AEC210 AC/DC Thermocouple Temperature Signal Transmitters are customised for use with any thermocouple type and supplied calibrated over the temperature range to suit your application. The AEC series instrumentation…

ADT133

ADC355 – Pulse Input Repeater / Isolator

The ADC355 is our pulse signal input repeater / isolator output suitable for SIL 1, 2 & 3 applications Input can be specified as volt free contacts Output repeat can...

The ADC355 is our pulse signal input repeater / isolator output suitable for SIL 1, 2 & 3 applications Input can be specified as volt free contacts Output repeat can…

ADT133

ADW511 – Millivolt Two-Wire Input Transmitter

...cold junction compensation fitted as standard Supply is nominal 24Vdc (can vary from 12 to 36V dc) Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient:...

…cold junction compensation fitted as standard Supply is nominal 24Vdc (can vary from 12 to 36V dc) Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient:…

ADT133

ADW521 – RTD Two-Wire Input Temperature Transmitter

...may be specified Supply is nominal 24Vdc (can vary from 12 to 36V dc) Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient: -15°C to +55°C...

…may be specified Supply is nominal 24Vdc (can vary from 12 to 36V dc) Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient: -15°C to +55°C…

AEC132

AEC122 – AC/DC RTD Input Temperature Trip Amplifier

...2 independent relay outputs, each trip relay provides a changeover contact output, rated at 250V AC 2A, 120V AC 1A (24Vdc 2A). Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature:...

…2 independent relay outputs, each trip relay provides a changeover contact output, rated at 250V AC 2A, 120V AC 1A (24Vdc 2A). Environmental Condition Performance Mounting/Dimensions Environmental Condition Storage Temperature:…

AEC222 – AC/DC RTD Input Temperature Signal Trip-Transmitter/Isolator

The AEC222 is our AC/DC RTD Temperature Signal Trip-Transmitter/Isolator with suitable for 2/3-wire PT100 RTD input Input from 2 or 3 wire RTD sensor (PT100) with a span greater than...

The AEC222 is our AC/DC RTD Temperature Signal Trip-Transmitter/Isolator with suitable for 2/3-wire PT100 RTD input Input from 2 or 3 wire RTD sensor (PT100) with a span greater than…

ADM240DI

ADT121KX-4W-RIS-ET7274 – RTD Input Temperature (4-wire) Output Trip Amplifier

...Response time: <400mS Isolation: 500Vdc Input/Contacts/Supply/Earth Mounting/Dimensions Enclosure: 50w x 75h x 182d mm Din Rail (TS35) mounting as standard View Datasheet Request A Quote Name Email Message Request Quote...

…Response time: <400mS Isolation: 500Vdc Input/Contacts/Supply/Earth Mounting/Dimensions Enclosure: 50w x 75h x 182d mm Din Rail (TS35) mounting as standard View Datasheet Request A Quote Name Email Message Request Quote…

ADT135

ADT133X – Auto Input Switch

The ADT133X is our auto input switch suitable for SIL 1, 2 & 3 applications. Input 1 is switched to the output as long as it is above the level...

The ADT133X is our auto input switch suitable for SIL 1, 2 & 3 applications. Input 1 is switched to the output as long as it is above the level…

AMT230X-HPA Higher Power Input Signal Transmitter

The AMT230X-HPA is our high power signal transmitter suitable for SIL 1, 2 & 3 applications. Input 0.5 to 150Vdc Typical output 0-10Vdc @ 12A however voltage range can be...

The AMT230X-HPA is our high power signal transmitter suitable for SIL 1, 2 & 3 applications. Input 0.5 to 150Vdc Typical output 0-10Vdc @ 12A however voltage range can be…

AMT270 Strain Gauge Input Signal Transmitter

The AMT270 is our strain gauge signal transmitter suitable for SIL 1, 2 & 3 applications Single Output Double Output Transmitter Single trip Transmitter Double Trip AMT270 AMT271 AMT272 AMT276...

The AMT270 is our strain gauge signal transmitter suitable for SIL 1, 2 & 3 applications Single Output Double Output Transmitter Single trip Transmitter Double Trip AMT270 AMT271 AMT272 AMT276…