FDC132 – Process Dual Level Input Trip Amplifier The FDC132 is our Process input dual level trip amplifier suitable for SIL 1, 2 & 3 applications. Input of 4-20mA, input impedance 20ohms Each trip output is set of... The FDC132 is our Process input dual level trip amplifier suitable for SIL 1, 2 & 3 applications. Input of 4-20mA, input impedance 20ohms Each trip output is set of…
ADC/ADP/AGS Series – Arithmetic units & PSU SKU: ADC/ADP/AGS Series The ADC Series Arithmetic units are process signal input instruments for Summation, Averaging, Deviation, Differential or Subtraction, high or low level selection, or any other similar applications... SKU: ADC/ADP/AGS Series The ADC Series Arithmetic units are process signal input instruments for Summation, Averaging, Deviation, Differential or Subtraction, high or low level selection, or any other similar applications…
ADM221X – Dual Output RTD/Temperature Input Signal Splitter The ADM221X is a Dual Output RTD Temperature Signal Input Splitter with a 95 to 250Vac Universal AC supply voltage. It is calibrated and manufactured within our high impact polycarbonate... The ADM221X is a Dual Output RTD Temperature Signal Input Splitter with a 95 to 250Vac Universal AC supply voltage. It is calibrated and manufactured within our high impact polycarbonate…
AEC211 – Thermocouple Input Temperature Transmitter The AEC211 is our Thermocouple Temperature Signal Dual Output transmitter suitable for combinations of Process Inputs & Outputs. Input is any type K, J or T Thermocouple Range with a... The AEC211 is our Thermocouple Temperature Signal Dual Output transmitter suitable for combinations of Process Inputs & Outputs. Input is any type K, J or T Thermocouple Range with a…
AEC122 – AC/DC RTD Input Temperature Trip Amplifier The AEC122 is our RTD Temperature Signal dual output trip amplifier suitable for SIL 1, 2 & 3 applications. Input is any 2 or 3 wire PT100 resistance temperature sensor.... The AEC122 is our RTD Temperature Signal dual output trip amplifier suitable for SIL 1, 2 & 3 applications. Input is any 2 or 3 wire PT100 resistance temperature sensor….
AEC221 – AC/DC RTD Input Temperature Signal Transmitter/Splitter The AEC221 is our AC/DC RTD Temperature Signal Transmitter/Splitter for suitable for combinations of PT100 RTD Sensor Inputs as standard & Process 4-20mA or 0-10Vdc Outputs Input is any 2... The AEC221 is our AC/DC RTD Temperature Signal Transmitter/Splitter for suitable for combinations of PT100 RTD Sensor Inputs as standard & Process 4-20mA or 0-10Vdc Outputs Input is any 2…
AEC222 – AC/DC RTD Input Temperature Signal Trip-Transmitter/Isolator The AEC222 is our AC/DC RTD Temperature Signal Trip-Transmitter/Isolator with suitable for 2/3-wire PT100 RTD input Input from 2 or 3 wire RTD sensor (PT100) with a span greater than... The AEC222 is our AC/DC RTD Temperature Signal Trip-Transmitter/Isolator with suitable for 2/3-wire PT100 RTD input Input from 2 or 3 wire RTD sensor (PT100) with a span greater than…
ADW231 – Dual Output Process Input Loop Powered Transmitter Our innovative ADW231 is a Dual Process Input Loop Powered Transmitter which is suitable for SIL1, SIL2 and SIL3 rated safety loop applications. High Accuracy and Low Volt Drop. Input... Our innovative ADW231 is a Dual Process Input Loop Powered Transmitter which is suitable for SIL1, SIL2 and SIL3 rated safety loop applications. High Accuracy and Low Volt Drop. Input…
ADT121KX-4W-RIS-ET7274 – RTD Input Temperature (4-wire) Output Trip Amplifier The ADT121-4 is our 4 wire trip output RTD Temperature signal input, trip amplifier suitable for SIL 1, 2 & 3 applications Input is any 2 or 3 wire PT100... The ADT121-4 is our 4 wire trip output RTD Temperature signal input, trip amplifier suitable for SIL 1, 2 & 3 applications Input is any 2 or 3 wire PT100…
ADT133X – Auto Input Switch The ADT133X is our auto input switch suitable for SIL 1, 2 & 3 applications. Input 1 is switched to the output as long as it is above the level... The ADT133X is our auto input switch suitable for SIL 1, 2 & 3 applications. Input 1 is switched to the output as long as it is above the level…