AHP991-RIS-8006 – High Current DC Output Power Supply ...that it is a direct plug-in replacement for existing RIS 19” racks. Supply voltage 115V or 230Vac (±10%) Output 24Vdc @ up to 2.5A Consumption 75VA (@ 2.5A output) Environmental... …that it is a direct plug-in replacement for existing RIS 19” racks. Supply voltage 115V or 230Vac (±10%) Output 24Vdc @ up to 2.5A Consumption 75VA (@ 2.5A output) Environmental…
ATA120 Resistance Temperature Sensor Input Trip Amplifier The ATA120 is our resistance temperature sensor trip amplifier suitable for SIL 1, 2 & 3 applications Input Single channel Double channel Single Trip Double Trip Single Trip Double Trip... The ATA120 is our resistance temperature sensor trip amplifier suitable for SIL 1, 2 & 3 applications Input Single channel Double channel Single Trip Double Trip Single Trip Double Trip…
AHT639 – Process Deviation Input Trip Amplifier ...specified in the range of: Current up to 100mA max (Passive) Voltage 0.4 to 100v max Typical input: 4-20mA (passive) Output each Trip output is a changeover contact rated at... …specified in the range of: Current up to 100mA max (Passive) Voltage 0.4 to 100v max Typical input: 4-20mA (passive) Output each Trip output is a changeover contact rated at…
ATA110 Thermocouple Temperature And Millivolt Input Trip Amplifier The ATA110 is our thermocouple and millivolt trip amplifier suitable for SIL 1, 2 & 3 applications Input Single channel Double channel Single Trip Double Trip Single Trip Double Trip... The ATA110 is our thermocouple and millivolt trip amplifier suitable for SIL 1, 2 & 3 applications Input Single channel Double channel Single Trip Double Trip Single Trip Double Trip…
AHM710 – Millivolt Input Trip Transmitter The AHM710 is our millivolt input trip signal transmitter which is suitable for SIL 1, 2 & 3 rated (EN 61508-2) safety system loop applications Input to accept mV signal... The AHM710 is our millivolt input trip signal transmitter which is suitable for SIL 1, 2 & 3 rated (EN 61508-2) safety system loop applications Input to accept mV signal…
ADT132 – Process Input Dual Output Trip Amplifier ...as upscale on the open circuit, Bi-colour red/green LED, RFI protection (IEC61000-4-3) and more. The instrumentation is manufactured within our high impact strength, polycarbonate din rail & surface mounting enclosure.... …as upscale on the open circuit, Bi-colour red/green LED, RFI protection (IEC61000-4-3) and more. The instrumentation is manufactured within our high impact strength, polycarbonate din rail & surface mounting enclosure….
ADM237 – Process Input Signal Transmitter with Excitation Supply The ADM237 is a Process Signal Input Transmitter with Excitation Supply suitable for SIL1, SIL 2 and SIL3 rated safety loop applications and for input from any two-wire transmitter with... The ADM237 is a Process Signal Input Transmitter with Excitation Supply suitable for SIL1, SIL 2 and SIL3 rated safety loop applications and for input from any two-wire transmitter with…
AEC270 – Strain Gauge Input Signal Transmitter The AEC270 is a Strain Gauge Signal Transmitter suitable for combinations of Process Inputs and Outputs. The excitation set at 5 to 10V at up to 22mA. The standard output... The AEC270 is a Strain Gauge Signal Transmitter suitable for combinations of Process Inputs and Outputs. The excitation set at 5 to 10V at up to 22mA. The standard output…
ADT138X-5 – Five Channel Process Input Single Output Trip Amplifier The ADT138X-5 is a Five Channel Process Signal Input Single Output Trip Amplifier with 1oo1 architecture suitable for any process input and SIL1 & SIL2 rated safety loop applications. More... The ADT138X-5 is a Five Channel Process Signal Input Single Output Trip Amplifier with 1oo1 architecture suitable for any process input and SIL1 & SIL2 rated safety loop applications. More…
ADT181 – Frequency Input Single Ouput Trip Amplifier Our ADT181 is a Frequency Signal Input Single Set Point Dual Output Trip Amplifier suitable for SIL1, SIL2 and SIL3 (IEC61508-2) rated safety loop applications and any process input. RFI... Our ADT181 is a Frequency Signal Input Single Set Point Dual Output Trip Amplifier suitable for SIL1, SIL2 and SIL3 (IEC61508-2) rated safety loop applications and any process input. RFI…