ADT133

ADM216 – Thermocouple Trip Transmitter / Isolator

...provided as standard. Output is any standard process current or voltage All AMELEC manufactured instruments are supplied calibrated to customer requirements, calibration certificates traceable to national standards are available on...

…provided as standard. Output is any standard process current or voltage All AMELEC manufactured instruments are supplied calibrated to customer requirements, calibration certificates traceable to national standards are available on…

ASM230

FDC132 – Process Dual Level Input Trip Amplifier

The FDC132 is our Process input dual level trip amplifier suitable for SIL 1, 2 & 3 applications. Input of 4-20mA, input impedance 20ohms Each trip output is set of...

The FDC132 is our Process input dual level trip amplifier suitable for SIL 1, 2 & 3 applications. Input of 4-20mA, input impedance 20ohms Each trip output is set of…

ASM230

ASM230 – Programmable Signal Transmitter/Isolator

ASM230 is a Programmable Signal Isolator accepting any Process Inputs that can be factory set to your required input and output at time of order and is user programmable via...

ASM230 is a Programmable Signal Isolator accepting any Process Inputs that can be factory set to your required input and output at time of order and is user programmable via…

ASM230

ASM210 – Thermocouple Input Temperature Transmitter/Isolator

...Input is any mV signal developed from any thermocouple type; J, K, N, R, S or T, with a minimum 4mV span. Output current source can be up to 20mA...

…Input is any mV signal developed from any thermocouple type; J, K, N, R, S or T, with a minimum 4mV span. Output current source can be up to 20mA…

ADT133

ADM240XLRP – Resistance/Potentiometer Transmitter/Controller

...wire pot input connections. Input 2; Normally Open contact, either Close to Hold the output signal level, or drive to a pre-determined output level and hold. Output; DC current or...

…wire pot input connections. Input 2; Normally Open contact, either Close to Hold the output signal level, or drive to a pre-determined output level and hold. Output; DC current or…

ADM235

ADM235 – 5 Channel Output/Input Signal Isolator

The ADM235 is a 5 Channel Signal Isolator/Converter accepting 5 Process Input / Outputs suitable for use with SIL1, SIL2 and SIL3 rated safety loop applications. It also has the...

The ADM235 is a 5 Channel Signal Isolator/Converter accepting 5 Process Input / Outputs suitable for use with SIL1, SIL2 and SIL3 rated safety loop applications. It also has the…

ADM213X-2 – Millivolt Dual Input Transmitter

...process current or voltage Environmental Condition Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient: -15°C to +55°C Relative Humidity: 5% to 95% RH Mounting/Dimensions Enclosure: 50w x 75h...

…process current or voltage Environmental Condition Mounting/Dimensions Environmental Condition Storage Temperature: -40°C to +70°C Operating Ambient: -15°C to +55°C Relative Humidity: 5% to 95% RH Mounting/Dimensions Enclosure: 50w x 75h…

APM489-LD-4-P

APM489-LD-4-P – 4″ High 4 Digit Process DC Input Large Display Panel Meter

The APM489-LD-4-P is a 4″ High 4 Digit Large Display Panel Meter with 95-265Vac supply voltage suitable for a combination of process inputs. (12V / 24Vdc option available on request)...

The APM489-LD-4-P is a 4″ High 4 Digit Large Display Panel Meter with 95-265Vac supply voltage suitable for a combination of process inputs. (12V / 24Vdc option available on request)…

ASM230

ASW230 – Loop Powered Process Input Signal Isolator

ASW230 is a Loop Powered Process Signal Isolator which is suitable for SIL1, SIL2 and SIL3 rated safety loop applications. High Accuracy and Low Volt Drop. Input and output is...

ASW230 is a Loop Powered Process Signal Isolator which is suitable for SIL1, SIL2 and SIL3 rated safety loop applications. High Accuracy and Low Volt Drop. Input and output is…