Our ADT135 is Pump/Level Control Input Trip Amplifier, with dual on/off trips,that is suitable for SIL1, SIL2 and SIL3 rated safety loop applications and any process input. This unit has…
Amelec has over 45 years of experience supplying signal conditioning instrumentation across the nuclear industry, while supporting our legacy products. Supplying to Sellafield, AWE, Magnox, CCFE, Westinghouse/Springfields Fuelds, British Energy/EDF…
…2 wire ADT126 Process ADT131 Voltage 1/P Z 1MOhm – Current 400mV drop ADT132 Pump Control ADT135 Process (Diff) ADT139 Slidewire ADT141 Conventional…
The ADP416 3-Phase 4-Wire Unbalanced Watt/Power Transducer is suitable for combinations of process inputs. Standard input current 0-1 or 0-5Amps, Direct or via CT’s. Standard input voltage 63V, 115V, 230V…
The ADR131X-3-DC our three way output interface relay is suitable for combinations of DC process current inputs and SIL1, SIL2 & SIL3 rated safety loop applications. Input isa DC 24V…
The AGS1126X-EP is an externally powered Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axis under harsh circumstances and…
The ADR131X-5-DC Five Way Output Interface Relay is suitable for combinations of process current inputs and SIL1, SIL2 & SIL3 rated safety loop applications. Input a DC 24V to 110V…
The AGS1135 Water Usage Input Monitor / Controller is suitable for combinations of process inputs and SIL1, SIL2 & SIL3 rated safety loop applications. Input is any volt free contacts…
The ASM210 is our Temperature Monitoring Thermocouple Input signal transmitter/isolator suitable for SIL 1 and SIL 2 rated (EN 61508-2) Safety Instrumented System (SIS) Loop applications, as 1oo1 architecture (HFT:0)….
The AGS1126 is a Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axus under harsh circumstances and returning to…