View our informative technical factsheet for our ADM/ADW transmitters and trip transmitters. The input(s), contacts, supply and earth are fully isolated. Whether the function is rtd, voltage, current, slidewire, millivolt,…
The ADP416 3-Phase 4-Wire Unbalanced Watt/Power Transducer is suitable for combinations of process inputs. Standard input current 0-1 or 0-5Amps, Direct or via CT’s. Standard input voltage 63V, 115V, 230V…
The ADR131X-3-DC our three way output interface relay is suitable for combinations of DC process current inputs and SIL1, SIL2 & SIL3 rated safety loop applications. Input isa DC 24V…
The AGS1126X-EP is an externally powered Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axis under harsh circumstances and…
The ADR131X-5-DC Five Way Output Interface Relay is suitable for combinations of process current inputs and SIL1, SIL2 & SIL3 rated safety loop applications. Input a DC 24V to 110V…
The AGS1135 Water Usage Input Monitor / Controller is suitable for combinations of process inputs and SIL1, SIL2 & SIL3 rated safety loop applications. Input is any volt free contacts…
The ASM210 is our Temperature Monitoring Thermocouple Input signal transmitter/isolator suitable for SIL 1 and SIL 2 rated (EN 61508-2) Safety Instrumented System (SIS) Loop applications, as 1oo1 architecture (HFT:0)….
The AGS1126 is a Heading Rate of Change Sensor suitable for applications requiring precise rate of change of heading measurements along a single axus under harsh circumstances and returning to…
The ACC315 is our Process Signal Input Multiplier / Divider Unit for SIL 1, 2 & 3 applications. Multiplication and divider unit can be used for multiple applications requiring a…
The ADT142 is our potentiometer dual output trip amplifier suitable for SIL 1, 2 & 3 applications. Input is and Potentiometer input. Ouput is a set of changeover contacts (D.P.C.O)…